Please confirm your optic's footprint PRIOR to placing your order, as we cannot accept ANY returns on RDO plates. Note: Our plates will not work in conjunction with ANY other adapter plates.
For the LTT RDO Solution for Beretta PX4, we currently have options for the RMR/SRO, the Doctor Optic/Noblex family of optics, the Holosun 509T, the Delta Point Pro, EPS. When you purchase a plate, the mounting screws as listed below are included.
NOTE: These plates will not fit on the Beretta PX4 RDO solution AS IT COMES from Beretta. These will only work with LTT’s proprietary RDO solution.
Q: Can I buy a secondary slide with the LTT RDO solution for my PX4?
A: No, there are no additional slides available for PX4 models at this time.
Q: What is the co-witness of the RDO BUIS?
A: The LTT RDO included front & rear BUIS is a lower-1/3rd co-witness depending on the optic, different optics will affect the co-witness position.
Q: Can you cut my PX4 SubCompact for RDO?
A: No, there is not enough space on the slide for our RDO solution cut.
Q: What red dot optics are supported by the LTT RDO Solution?
Our RMR Plate fits:
- Trijicon RMR
- Trijicon SRO
- Trijicon RMR HD
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Riton X3 Tactix PRD
- NcStar VISM FlipDot Pro
- Swampfox Kingslayer
- DOES NOT FIT RMRcc
- DOES NOT FIT RCR (Trijicon's proprietary capstan screws will not work with our t-nut inserts)
- RMR to Plate Screws: Holosun to the RDO Plate use: 4x40 – 5/16 and the RMR or SRO to the RDO Plate use: 4x40 – 3/8
Our Docter Plate fits:
- Docter/Noblex Sight C
- Docter/Noblex sight 2+
- Docter/Noblex sight III
- Docter/Noblex QUICKsight 5.0 VR
- Noblex Sight G
- Vortex Venom
- Burris Fastfire 2*
- Burris Fastfire 3*
- Delta Optical MiniDot*
- Delta Optical MiniDot II*
- Hawke Reflex 1×25*
- Sightmark Mini Shot Pro Spec*
- Sightmark Mini Shot M-Spec
- Leica Tempus
- MAKdot 1×25
- Vomz Pilad 1×20
- Docter Optic to Plate Screws: 4x40 - 3/8 or 4x40 - 5/16
Our Sig Romeo/Delta Plate fits (no built-in rear sight):
- Leupold Delta Point Pro
- Sig Sauer Romeo 2
- Delta/Romeo Optic to Plate Screws: 4x40 - 1/2
- Sig Romeo X will not work on our plates
Our HE509T Plate fits:
- Holosun HE509T
Note: Our 509T Plate will not fit the 509 ACSS
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Holosun 407k
- Holosun 507k
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
- EPS Optic to Plate Screws: 4x40 - 5/16
Important Note Regarding RDO Plate Compatibility: This is not a comprehensive list of all the optics that may work with our plates. Our plates have been designed to fit tightly with the optic body of the main optic it was designed for. Other optics manufacturers may use the same footprint for mounting but have a different size optic body or may change the size of their optic body without warning. We cannot guarantee fit with all manufacturers that use these listed footprints.
Some customers have reported the Jagerwerks SRO Shroud will fit on our system, however we have not confirmed this. Customers using this or other shrouds that add height between the adapter plate and the optic should be aware that they MAY or MAY NOT need longer/taller screws to get full thread interface - LTT does not carry longer screws.
For more information on RDO Mounting Footprints, please click this link: Optics Info
Comments
0 comments
Please sign in to leave a comment.